If you’re looking for a quick and easy way to make a travel-sized pillowcase, you can use this free pattern. This pillowcase is perfect for taking along on trips, or for using as a travel-sized pillow.
To make the pillowcase, you’ll need:
1/2 yard of fabric
coordinating thread
sewing machine
fabric scissors
Once you have all of the supplies, you can get started by following these steps:
1. Cut your fabric into a rectangle that is 18 inches wide and 24 inches long.
2. Fold the fabric in half so that the 18-inch width is now the length. Then, sew along the two long edges of the fabric, using a 1/4-inch seam allowance.
3. Turn the fabric right-side out, and press it flat.
4. Fold the top of the pillowcase down 1 1/2 inches, and sew a seam across the top.
5. Finally, slip your pillow inside the case, and enjoy your new travel-sized pillowcase!
Contents
How much fabric is needed for a travel pillowcase?
Most people don’t think about it, but if you’re going to be traveling and need a pillowcase, you’ll need to know how much fabric to bring.
The amount of fabric you need for a travel pillowcase will vary depending on the size of your pillow and the type of fabric you use. However, as a general rule, you’ll need about two yards of fabric.
If you’re using a lightweight fabric, like cotton or muslin, you may need a little bit more. If you’re using a heavier fabric, like denim or corduroy, you may need a little less.
In addition to the fabric, you’ll also need about a yard of bias tape or a half-inch seam allowance.
So, if you’re heading out on vacation and need a new pillowcase, be sure to remember to bring enough fabric!
How do you make a mini pillow case?
Making a mini pillow case is a relatively simple process. You will need some fabric, a sewing machine, and some basic sewing supplies.
The first step is to cut a piece of fabric that is the right size for your pillow. You can either use a piece of fabric that you have on hand, or you can purchase a pre-cut piece of fabric from a fabric store.
Once you have your fabric, you will need to sew the two short ends together to create a tube. Then, use a sewing machine to sew a seam along the long edge of the tube.
Finally, turn the tube inside out and press it flat. Your mini pillow case is now ready to use!
How do you make a directional pillow case?
Making a directional pillow case is a great way to show your personality and style. It’s also a fun project that can be completed in just a few hours. To get started, you’ll need a few supplies.
You’ll need a piece of fabric that’s at least 42 inches by 18 inches. You’ll also need a piece of batting that’s the same size as your fabric. If you want to make a pillow cover, you’ll also need a zipper that’s at least 18 inches long.
Once you have your supplies, you can begin making your pillow case. First, fold the fabric in half and iron it. Then, fold the fabric in half again and iron it. This will create a piece of fabric that’s 9 inches by 18 inches.
Next, place the batting on top of the fabric. Make sure that the batting is centered. Then, using a sewing machine, sew around the edges of the batting. Be sure to leave a hole in the middle of one side so that you can put the zipper in later.
Once the batting is secured, it’s time to add the zipper. To do this, place the fabric so that the right sides are facing each other. Sew around the edges of the fabric, but leave a small opening at the top.
Once the fabric is sewn together, turn it right side out. Then, insert the zipper into the opening. Be sure to line up the zipper with the opening in the fabric. Sew the zipper in place.
Finally, sew the opening at the top of the fabric closed. Now you have a beautiful directional pillow case that shows your personality and style.
How do you make a free pillowcase pattern?
There are a few different ways that you can make a free pillowcase pattern. One way is to use a basic pillowcase pattern and adjust the size to fit the pillow that you want to make the case for. Another way is to use a template that is specifically designed for a free pillowcase pattern.
If you want to adjust a basic pillowcase pattern to fit the pillow you want to make a case for, you will need to measure the width and length of the pillow. Once you have these measurements, you can adjust the pattern to fit. You will also need to decide on the size of the case. The standard size for a pillowcase is 21 inches wide by 31 inches long. However, you can make the case smaller or larger if you want.
If you want to use a template that is specifically designed for a free pillowcase pattern, there are a few different options that you can choose from. One option is to download a template from the internet. There are a number of websites that offer free templates for a wide variety of projects. Another option is to use a template that is included in a sewing pattern. Many sewing patterns include a template for a pillowcase.
Once you have chosen a template, you will need to print it out. Make sure that the printout is the correct size. You can usually adjust the size of the printout by using the settings on your printer. Once the template is printed out, you can cut it out.
Once you have the template, you will need to decide on the fabric that you want to use for the pillowcase. You will also need to purchase some matching thread.
Once you have all of the supplies, you can begin to sew the pillowcase. The first step is to fold the fabric in half so that the right sides are facing each other. Then, place the template on the fabric and pin it in place.
Next, use a sewing machine to sew around the template. Make sure to leave a hole so that you can turn the case inside out. Once the case is turned inside out, use a needle and thread to sew the hole closed.
Now, all you have to do is fill the case with a pillow and you are ready to go!
How do you make travel size pillow cases?
Making your own travel-sized pillowcase is a great way to save money and ensure a good night’s sleep while on the road. Here’s how to do it:
1. Cut a piece of fabric measuring 18 inches by 26 inches.
2. Fold the fabric in half so that the 18-inch edge lines up with the 26-inch edge. Sew along the two edges, using a ½-inch seam allowance.
3. Turn the pillowcase right-side out.
4. Insert a travel pillow and enjoy a good night’s sleep!
What size is a travel pillowcase?
What size is a travel pillowcase?
A travel pillowcase is typically about 20 inches by 26 inches. This size is large enough to fit most standard-sized travel pillows. Some travel pillowcases are even larger, making them a good fit for pillows that are a bit oversized. If you have a particularly large or small pillow, you may need to find a travel pillowcase that is specifically tailored to your needs.
What size is a travel pillow case?
What size is a travel pillow case?
A travel pillow case is typically a standard pillowcase size, which is 20 inches by 26 inches.